Flash – Sony Cyber-shot 4-130-938-12(1) User Manual
Page 31
Table of
Operation
HOME/MENU
Index
31
GB
Flash
1 Lower the lens cover to switch to shooting mode.
2
(Flash)
t desired mode t
• The flash strobes twice. The first flash adjusts the light quantity.
• While charging the flash,
is displayed.
• You cannot use the flash during burst or bracket shooting.
•
(Flash On) or
(Slow Synchro (Flash On)) are not available when the camera is in Intelligent Auto
Adjustment mode.
(Flash Auto) Flashes when there is insufficient light or backlight.
(Flash On)
Flash always operates.
(Slow
Synchro (Flash
On))
Flash always operates.
The shutter speed is slow in a dark place to clearly shoot the
background that is out of flash light.
(Flash Off)
Flash does not operate.
Notes
z
When the “White circular spots” appears in flash
photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.
How can the “White circular spots” be reduced?
• Light the room and shoot the subject without a flash.
• Select
(High Sensitivity) mode in Scene Selection. (
(Flash Off) is automatically selected.)
• Even though you selected
(High Sensitivity) mode in Scene Selection, the shutter speed might be
slower under low-light conditions, or in a dark place. In that case, use a tripod or hold your arms
firmly at your side after pressing the shutter button.
Camera
Subject
Particles (dust, pollen, etc.)
in the air