Sony 3-293-639-11(1) - Manual (Page 11)

CMT-BX30R.GB.3-293-639-11(1)
11 GB
G
etting S
tar
ted
 Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
 Speakers
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
 Power
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
Remove a disc to protect the CD
mechanism.
2
Press CD  to select the CD
function.
3
Hold down VOL +  and DSGX 
on the unit, and press   on the
unit until “STANDBY” appears.
4
After “LOCK” appears, unplug the
power cord.
To use the remote
Slide and remove the battery
compartment lid  , and insert the two
supplied R6 (size AA) batteries,  side
first, matching the polarities shown
below.
Notes
 With normal use, the batteries should last for
about six months.
 Do not mix an old battery with a new one or
mix different types of batteries.
 If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.