Listening to music of an usb device, Listening to music of, An usb device – Sony 3-293-639-11(1) User Manual
Page 18
CMT-BX30R.GB.3-293-639-11(1)
1
GB
Notes
Do not remove the USB device during
recording or erase operations. Doing so
may corrupt the data on the USB device or
damage the USB device itself.
Do not connect the system and the USB
device through an USB hub.
When recording from a CD, the tracks
are recorded as 128 kbps MP3 files. When
recording from an MP3 disc, MP3 files
are recorded with the same bit rate as the
original MP3 files.
While recording from an MP3 disc, no sound
is output and “High Speed” appears.
CD text information is not recorded in the
created MP3 files.
If you cancel the recording partway, an
MP3 file is created up to the point when the
recording was stopped.
Recording stops automatically if:
the USB device runs out of space during
recording.
the number of audio files on the USB
device reaches the limit for the number
that the system can recognize.
The maximum number of audio files and
folders that can be contained on a single USB
device is 999 (including the “ROOT” and
“MUSIC” folders).
The maximum number of audio files and
folders may vary depending on the audio file
and folder structure.
You cannot erase audio files and folders in
shuffle play mode or program play mode.
If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
If a folder or file that you are trying to record
already exists on the USB device with the
same name, a sequential number is added
after the name without overwriting the
original folder or file.
Listening to music of
an USB device
You can listen to music stored in the USB
device.
The audio formats that can be played
back by this system are as follows:
MP3*/WMA*/AAC*
See “Compatible USB devices with this
system” (page 34) for a list of USB devices
that can be connected to this system.
*
Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
1
Select the USB function.
Press USB
.
2
Connect an optional USB device
to the (USB) port
.
When the USB device is connected,
the display changes as follows:
“Reading” “Storage Drive*”
* When connecting USB storage media,
the volume label is displayed next if
recorded.
Note
It may take about 10 seconds before
“Reading” appears depending on the type
of USB device connected.
3
Start playback.
Press (or USB on the unit)
.
4
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
the unit)
.