Sunfire CRW-3 - Manual (Page 15)

User's Manual
15
Fitting the loudspeaker
1. Press the loudspeaker into the
sheetrock opening, and screw in
the six clamp screws. As the screw
turns clockwise, a clamp rotates out
and presses onto the back of the
sheetrock to hold the loudspeaker
firmly in place.
Painting the loudspeaker
1. Press the paint shield in place to
cover the woofers and ribbon dur-
ing painting.
. Remove the paint shield when the
painting is done.
Final steps
1. The supplied Sunfire badge can
now be pressed in place to match
the orientation of your loudspeaker.
The adhesive backing holds it in
place
. Add the magnetic grille to cover the
woofers and ribbon.
3. Enjoy your new loudspeaker. See
page 1 regarding the break-in pe-
riod required before the loudspeak-
ers will sound their best.
Tighten the clamps (the sheetrock is not
shown for clarity)
Rear view showing the clamps engaged
and the wiring in place