Schneider Electric 560125D/2 - Manual (Page 5)

Multi Room Audio Amplifier Installation Instructions
5
• Turn down the volume setting before connecting headphones. Connect the
headphones to the amplifier BEFORE placing them on your head.
• Do not allow children to use the Multi Room Audio equipment without adequate
supervision.
Cautions
Prevent damage to the equipment and extend its useful life by following these
guidelines:
• Only use a Clipsal approved power supply to power an amplifier. Using any
other power supply can damage the unit, and void the warranty.
• The amplifiers are designed for indoor use only in moderate to tropical climates.
Operating the equipment at high temperatures for extended periods will reduce
reliability and product life.
• Provide adequate ventilation. Ensure at least 50 mm of free space is available at
each side of the high power amplifiers. Allow at least 15 mm of free space
directly above the units.
• Never insert C-Bus RJ45 plugs into LAN or Digital Audio sockets. Damage to
the equipment can occur. The use of colour-coded network cables is highly
recommended.
• Disconnect power from the amplifier before connecting or disconnecting cables.
Care Instructions
Maintain the appearance of the equipment by following these guidelines:
• Use a soft lint free cloth for cleaning.
• Do not use chemicals or spray cleaners.
• Do not use hard, sharp objects to select the controls.
• Do not allow dust to accumulate on the equipment.