Sony DAV-DS1000 - Manual (Page 25)

Getting Star
ted
25 GB
Connecting the rear speakers using the speaker cords (Wired setting)
You can also connect the rear speakers using the speaker cord. In this case, you do not need to
connect the wireless data output cords to the front speakers.
Notes
• When you use the speakers in Wired setting, make sure to set “CONNECT” to “WIRED” in “SPEAKER
SETUP” (page 33).
• When you use the speakers in Wired setting, do not connect the AC power cords to the rear speakers. If the
power of the rear speakers is on, no sound is output from the rear speakers.
Terminals for connecting the speakers
Connect the To the
Front speakers SPEAKER FRONT L (white) and R (red) jacks
Center speaker SPEAKER CENTER (green) jack
Rear speakers SPEAKER REAR L (blue) and R (grey) jacks
TUNER INPUT
WIRELESS REAR
L
R
SPEAKER IMPEDANCE USE 4 Ω
FRONT L
REAR L
CENTER FRONT R
REAR R
FOOT LIGHT
HIGH
LOW OFF
MONITOR OUTPUT
COMPONENT VIDEO OUTPUT
VIDEO 1
VIDEO
L L
L
Y
P B /C B
P R /C R R
R R
VIDEO
INPUT
AUDIO
INPUT
S VIDEO (DVD ONLY)
SCAN SELECT SELECTABLE
INTERLACE
SYSTEM CONNECTOR
VIDEO 2
VIDEO
INPUT
AUDIO
INPUT
VIDEO OUTPUT
AUDIO OUTPUT
SPEAKER
IMPEDANCE USE 4 Ω
FRONT L
REAR L
WIRED
SETTING
ONLY
CENTER FRONT R
REAR R
Rear speaker (L) Rear speaker (R)
Subwoofer
Front speaker (R)
Center speaker
Front speaker (L)