Sharp XG-PH50X - Manual (Page 45)

Basic Operation
-41
ENTER button
KEYSTONE
button
UNDO button
Adjustment
button
('/"/\/|)
Mouse/adjustment
button (
' / " / \ / | )
ENTER button
UNDO button
KEYSTONE
button
For correcting an image desig-
nating the corner of the pro-
jected image
For correcting an image desig-
nating the horizontal or vertical
axes
For correcting the image
distortion.
Only when “H & V KEY-
STONE” is set to the values
other than “0”, “IMAGE
RESIZING” works.
GEOMETRIC
ADJUSTMENT
H & V KEYSTONE
IMAGE RESIZING
↑
↑
Correcting Trapezoidal
Distortion
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called
Keystone Correction .
There are the two types of the Keystone Cor-
rection.
1) “GEOMETRIC ADJUSTMENT” for correct-
ing an image designating the corner of the
projected image
2) “H & V KEYSTONE”/“IMAGE RESIZING”
for correcting an image designating the
horizontal and vertical axes
Selecting the Type of the Key-
stone Correction
Press on the projector or on the
remote control.
• “GEOMETRIC ADJUSTMENT” will be dis-
played.
• Each time or is pressed, the display
toggles as follows:
GEOMETRIC → H & V KEYSTONE
ADJUSTMENT
The display ← IMAGE RESIZING
disappears.