Sharp XG-PH50X - Manual (Page 46)

-42
Geometric Adjustment
Upper Left Upper Right Lower Right
Lower Left
GEOMETRIC ADJUSTMENT
1
Press on the projector or
on the remote control re-
peatedly until “GEOMETRIC
ADJUSTMENT” is displayed.
2
Press the buttons below to ad-
just the position, size or focus
of the projected image.
• Match screen’s four sides to green
test pattern.
• Pressing ' ' ' ' ', " " " " ", \ \ \ \ \ or | | | | | on the projector
or on the remote control allows you
to shift the lens.
• Pressing on the projector or on
the remote control allows you to adjust
the projected image size.
• Pressing on the projector or on the
remote control allows you to adjust the
focus.
3
Press on the projector or
on the remote control.
4
Press ', ", \ or | to move the
position for the upper left of the
image.
• Move the upper left of the yellow frame
onto the upper left of the screen.
5
Press or to set the position.
6
Repeat the same procedure with
the positions for the upper right,
lower right and lower left of the
image.
• At this time, pressing on the pro-
jector or on the remote control
returns to the previous screen.
• Before correcting the upper left of the
image, pressing or returns
to the reset confirmation screen.
• When the position of the lower left is
set, the correction is made and the
display disappears.
Image Projection
▼On-screen Display