Stanton M.207 - Manual (Page 27)

Specifications
Specifications
24
1. POWER: AC 100 – 240 V, 50/60 Hz, 16 W
2. DIMENSIONS (H x W x D) 108.2 mm x 250 mm x 352.6 mm
10.82 cm x 25 cm x 35.26 cm
3. WEIgHT: 9.25 lbs / 4.2 kg
4. STANDARD TEST CONDITION: Ambient Temperature: 22 +/- 2%
Relative Humidity: 65 +/- 5%
5. INPUT/OUTPUT IMPEDANCE & SENSITIVITY:
(EQ FLAT, UNITY GAIN (ALL GAIN, LEVEL AT CENTER, FADER MAXIMUM), FX OFF, LOAD=100K ohm)
5-1. Input Impedance and Reference Level:
Aux: 20K ohm /-10 dBV +/-0.1 dB (316 mV)
Line: 20K ohm /-10 dBV +/-0.1 dB (316 mV)
Phono: 47K ohm /-50 dBV +/-0.1 dB (3.16 mV)
Mic: 10K ohm /-50 dBV +/-0.1 dB (3.16 mV)
5-2. Output Impedance and Level:
Rec: 2.2K ohm /-10 dBV (316 mV) +/-2 dB
Master Unbal: 1K ohm /-10 dBV (316 mV) +/-2 dB
Master Bal.(Load=600 ohm) 600 ohm /-6 dBm (390 mV) +/-2 dB
Phones (Load=32 ohm) 33 ohm /-10 dBV (316 mV) +/-2 dB
6. FREQUENCY RESPONSE: (EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line, Aux: 20 Hz – 20 kHz +/-2 dB
Phono: 20 Hz – 20 kHz +2/-3 dB (RIAA)
Mic: 20 Hz – 20 kHz +2/-3 dB
7. THD + N: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Line, Aux: Less than 0.03% @1 kHz
Phono: Less than 0.1% @ 1 kHz (A-WEIGHTED)
Mic: Less than 0.1% @ 1 kHz (A-WEIGHTED)
8. MAXIMUM INPUT: (1 kHz, THD=1%, EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line, Aux: More than +14 dBV
Phono: More than -26 dBV
Mic: More than -26 dBV
9. MAXIMUM OUTPUT: (1 kHz, THD=1%, EQ FLAT, MAXIMUM GAIN, FX OFF, LOAD=100K ohm)
Master: More than +18 dBV (8.0 V)
Rec: More than +13 dBV (4.5 V)
Phones More than +4 dBV (1.58 V) LOAD=32 ohm
10. NOISE FLOOR: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, LOAD=100K ohm)
Line, Aux: Less than -86 dBV
Phono: Less than -75 dBV
Mic: Less than -76 dBV
11. CROSSTALK: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
L.R Separation: More than 70 dB @ 1 kHz for LINE, AUX and PHONO
Between Channels: More than 86 dB @1 kHz for LINE (AUX) to LINE (AUX),MIC
More than 85 dB @ 1 kHz for LINE to PHONO
12. EQ: (UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Low
Mid
High 10 +/-2 dB, below -32 dB at 70 Hz
10 +/-2 dB, below -32 dB at 1 kHz
10 +/-2 dB, below -32 dB at 13 kHz
13. CHANNEL BALANCE: Within 3 dB FROM 0 TO -40 dB
14. FADER KILL: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
Channel Fader: More than 85 dB at 1 kHz
Crossfader: More than 85 dB at 1 kHz
15. ACCESSORIES:
User Manual 1 pc
AC Power Cord 1 pc