Sanyo AVL-279 - Manual (Page 14)

Connecting the TV
Basic Connections
Connecting Satellite
Receiver
Connecting Digital
Satellite Receiver
Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
Use AV cables to connect the satellite receiver’s AUDIO and S-VIDEO OUT jacks
to the TV’s AUDIO and S-VIDEO IN jacks.
Connect the RF coaxial cable from the satellite dish to the input of the digital
satellite receiver.
Use a component video cable to connect the YPbPr jacks of your digital
satellite receiver to the TV’s component jacks.
Component video connection is necessary to view high-definition digital
broadcasting in 1080i, 720p, 480i and 480p. This TV displays most format
types of picture.
The component Jacks do not provide audio, so audio cables must be
connected to provide sound.
S- VIDEO
D -Sub/DVI
AUDIO INPUT
HDMI INPUT
COMPONENT
AV
P r P r
P b P b
Y Y
R
L L
R
L
R R
L
VIDEO VIDEO
2 1
1 2
D-Sub INPUT PC/DTV INPUT ( )
RF RS-232
TV Right Side
Digital Satellite Receiver
Component video cable
Audio cable RF coaxial cable
Cables are often color-coded
to connectors. Connect red to
red, white to white, etc.
Satellite Receiver
Satellite
antenna
cable
Cables are often color-coded
to connectors. Connect red to
AV cable
S-VIDEO
cable
If your is not equipped with S-VIDEO, use a VIDEO cable
(yellow) instead of the S-VIDEO cable.
satellite receiver
TV Right Side
13