Samsung SCC/SNC-C7478 - Manual (Page 3)

9. Attach fan and heater cables inside upper housing and attach dome cover safety
cable.
(figure 9a)
10. Return PTZ camera mechanism into upper housing by pressing the
two black handles until camera mechanism snaps into
place.
(figure 10a)
11. Close the dome cover by matching the arrow markers. Be sure internal
cabling does not obstruct camera’s movement.
12. Orientation of housing my be adjusted by rotating the ring on which the
safety cable is attached.
(figure 12a)
Completed mounted camera
Fan/heater cable
Safety Cable
9a
10a
12a
Remove plastic covering carefully and power dome with 24 VAC 2.5 amps
SCC/SNC-C7478 Installation Guide
SAMSUNG | GVI Security, Inc .
Phone: 972-245-7353 • Toll Free: 888-595-2288 • Fax: 972-245-7333
www.samsung-security.com v.11.19.08