Spalding 214994B - Manual (Page 18)

18
P/N 214994B 05/03
15
1.
10 feet
(3.05 m)
Carefully upright assembly. Apply moving system label (15) to front of pole as
shown. Regulation rim height is 10 feet (3.05 m).
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY
DAMAGE.
WARNING!
DO NOT LEAVE
ASSEMBLY
UNATTENDED WHEN
EMPTY; IT MAY TIP
OVER.
WARNING!
2.
30
29
27
29
Place assembled unit to desired location. Fill tank with water (30 gallons (114 liters))
or sand (360 lb. (163 kg)) and snap tank cap (30) in place.
Insert T-strap (29) through slot on back of base as shown. Secure unit to ground by
twisting tie down stake (27) into ground and hooking T-strap (29) onto tie down
stake (27).
29
SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM