Emergency override using the multi-function keypad – SIGMA Category 1 User Manual

Page 10

Advertising
background image

Auto Re-arm

This feature is turned on at installation, but can be turned off by your S U B A R U dealer.

Auto Re-arm will automatically re-arm and double-lock a pre-set time of 60 seconds

(dependent on programming), from the system being disarmed by the radio transmitter,

provided that no door, bonnet or boot has been opened during that time. This

prevents the vehicle being vulnerable if the radio transmitter button is pressed by mistake

perhaps from inside your house while your car is parked close by in the driveway or

street, or if children press the radio transmitter button in play! This feature provides extra

security with no inconvenience.

4. Emergency Override Using the

Multi-Function Keypad

IMPORTANT NOTICE:

In the following sections describing the functions of the multi-function keypad,

reference to a PIN code will be made. The PIN code for your security system will

have been issued to you on two self-adhesive labels. This PIN code is unique to

your security system and you must keep it in a safe place. Alternatively you can

change the PIN code printed on the issued labels, to one of your own choice that

you can easily remember. Failure to recall your PIN code could increase the cost of

replacing or adding further radio transmitters and will prevent yourself and your

S U B A R U dealer from overriding the security system in the unlikely event of radio

transmitter failure. If you do not know, or have forgotten your PIN code then your

S U B A R U dealer can reset this for you, provided that the security system is not

armed.

Note:

When using the keypad, each time a button is pressed the LED on the keypad will

flash once as confirmation. The next button should not be pressed before this

confirmation. However, you only have 10 seconds to enter the next character. If you

do not press the next character within this time period the LED on the keypad will

flash repeatedly, after which you must start the sequence again from the beginning.

Disarming the Security System if it fails to operate using the

Radio Transmitter

If the radio transmitter fails to operate the security system, due to a depleted battery in the

radio transmitter for example, or its total loss/damage, the security system can be

disarmed using the keypad. To do this, enter the vehicle (the siren will sound), type your

PIN code into the keypad, the security system will disarm in the normal way. The vehicle

should be started whilst the dashboard LED is still illuminated, before the self-setting

immobiliser re-arms. The keypad only allows three attempts to enter the correct PIN

code. If a third incorrect PIN code is entered the security system will ignore all PIN

code entries for 30 minutes. This is a security feature.

8

X i. Universal Opins.qxd 24/09/2004 11:44 Page 10

Advertising