Sharp XG-NV7XU - Manual (Page 41)

E-40
Useful Features
This function allows you to select the input signal type
(COMPUTER/RGB or COMPONENT) for INPUT 1 port.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options”.
3 Press ∂/ƒ to select “Signal Type”, and then
press ©.
4 Press ∂/ƒ to select “Computer/RGB” or
“Component”.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
Selecting the Signal Type
MOUSE ADJ.
5
2, 3, 4
1, 6
Projector
(GUI) On-screen Display
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select “Options”.
3 Press ∂/ƒ to select “Signal Info” to display the
current input signal.
4 To exit from the GUI, press MENU.
• In VIDEO mode, the resolution and frequency settings will
not be displayed.
This function allows you to check the current input signal
information.
2, 3
1, 4
Projector
Checking the Input Signal
(GUI) On-screen Display
MOUSE ADJ.
Remote control
Remote control