Sim2 Multimedia Grand Cinema RTX 55TV - Manual (Page 30)

30
The operation of the RTX 55TV as a graphic monitor is piloted
by signals received from the DB15 socket (AV Graphic unit) or
32 KHz signals (RGB + Sync or YCbCr) received from the socket
ports of the AV DVD unit.
Once the RTX 55TV has been connected to external applian-
ces (e.g. computer, video games console etc.), by plugging
the relative cables into the sockets, you can display the video
signal from the required source by selecting the corresponding
socket from the OSD.
This input selection procedure is done internally of the TV
Connections menu, which will be displayed by pressing the AV
button [10] on the remote control. Select “Graphic Mode” and
confirm: the following sub-menu appears.
Select and confirm the socket to which the external appliance
has been connected.
The basic operating steps such as switching on and off, selecting
5 OPERATION IN GRAPHIC MONITOR MODE
VGA
RGB-32
DVD-32
(DB15)
(RGBs)
(YCrCb)
the signal source, adjusting the audio volume and using the OSD
are the same in Graphic Monitor mode as in Television mode.
Accordingly, reference can be made to the instructions for ope-
rating the appliance in TV mode.
THE REMOTE CONTROL
In GRAPHIC MONITOR mode, the remote control can be used
to display the three menus dedicated to the various settings,
and to adjust the speaker volume.When consulting this chapter,
refer to the remote control summary table (Fig. 8).
FUNCTION BUTTONS ON THE CABINET
The function buttons of the RTX 55TV cabinet controls have no
effect in Graphic Monitor mode.