Basic operation (continued), Changing the channels – Sharp Aquos LC 20B1U User Manual
Page 18
17
1
Press the
button.
2
Press the
5
button.
BASIC OPERATION (Continued)
Changing the Channels
Changing channels by using Channel Select on the remote control
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
1
Press the
button.
2
Press the
button.
3
Press the
5
button.
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
●
When selecting a 1-digit channel number,
do not fail to press the
button first.
Changing channels with CH (
)/(
) on the remote control
Air
Press CH (
) and the channels change in the order shown below:
2
→ 3 → . . . → 68 → 69 → 2 → 3 → . . .
Press CH (
) and the channels change in the order shown below:
3
→ 2 → 69 → 68 → . . . → 3 → 2 → . . .
Cable Press CH (
) and the channels change in the order shown below:
1
→ 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .
Press CH (
) and the channels change in the order shown below:
3
→ 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .
1
4
7
MTS
2
5
8
0
3
6
9
100
POWER
DISPLAY
SLEEP
CARD
ENTER
CH
VOL
FLASHBACK
MUTE
BRIGHT
MENU TV/VIDEO
Channel
Select
0 –
5
1 – –
1 1 –
1 1 5
Note
LC-20B1U-GBpp01-18
02.2.21, 4:44 PM
17