Sony KE-P37M1 - Manual (Page 20)

18
Installation
Preventing the TV from Falling Down
After aerial and other equipment connections are completed, be sure to attach the supplied clamp screws to the rear of the
TV, and thread a sturdy cord or chain through it and attach it to a wall or pillar.
1
Remove one of the two screws on the rear of the TV, then install the supplied clamp screw in the screw hole.
2
Repeat step 1 to install the other clamp screw.
3
Attach a sturdy cord or chain securely to each clamp screw, and attach the cord or chain to a wall or pillar.
Attached
screw
clamp screw
(supplied)