Sanyo MM-8300 - Manual (Page 174)

164 Section 2J: Using Your Phone’s Built-in Camera
ⅷ Camera Settings to select your settings. (See “Selecting
Camera Settings”on page 169 for details.)
ⅷ Pics In Camera to go to your phone’s In Camera folder. (See
“In Camera Folder”on page 172 for details.)
ⅷ Go to Camcorder to switch to video mode. (See “Recording
Videos”on page 178 for details.)
ⅷ Key Guidance to indicate the key functions in camera
mode.
Setting the Flash
To activate the flash:
1. From camera mode, press Options (right softkey).
2. Highlight Flash and press .
3. Select one of the following options and press :
Ⅲ Off to deactivate the flash.
Ⅲ On This Shot to activate the flash for one shot.
Ⅲ On Always to activate the flash for all pictures.
Ⅲ Auto to activate the flash automatically.
Note: While the phone is open and in camera mode, press to switch
between flash modes.