Sony spp-n1025 - Manual (Page 43)

43 US Caller ID Features
Caller ID Features
Storing a number of the Caller ID list into
the Phone Directory
1
Display the name and phone number you want
to store from the Caller ID list (see page 39).
2
Confirm the number and press (SELECT).
3
Make “PGM” flash using the Jog lever, then
press (SELECT).
The cursor flashes at the end of the name.
Enter or change the name, if necessary (see page
28).
4
Press (SELECT).
The cursor flashes at the right of the phone
number.
Enter or change the phone number, if necessary
(see pages 28 and 29).
5
Press (SELECT) again.
You will hear a long confirmation beep and the
name and number are stored.
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number (See page 44).
• If the phone is connected to a Private Branch Exchange (PBX), you may need
to add an outside line access digit.
SMITH JOHN
DIAL PGM ERASE
SMITH JOH N
SMITH JOHN
continued