Sakar 92045 - Manual (Page 7)

- 7 -
• Opening the battery compartment and/or removing the battery will erase the photos
currently stored in the camera.
• Download your photos as often as possible. Photos may be lost when the batteries
run low.
Starting Your Camera
Press the POWER / MENU button to start the camera. The camera will sound a beep to confirm
that it is ready for use.
Taking Photos
1. Compose your shot using the viewfinder. (The optimal distance between the camera and the subject is
approximately 5 feet.)
2. Hold the camera steady and press the Shutter button to take a photo.
3. The camera will beep and the number of photos remained for the memory will be displayed on the
screen. Each consecutive photo taken will reduce this number by one.
If the photo taken number fails to reduce or if a "000" appears on the screen this is an indication that the
memory is full in which event no further photos can be taken until the existing photos have been
downloaded and cleared from the camera memory.
Note: The screen display indicates how many photos may still be taken at the current
resolution