Sony HD100 - Manual (Page 29)

29
Usi
n
g
t
h
e
O
n
-Screen
Di
sp
lays
5 Select “Return”.
The DIRECTV Antenna Type display closes to show the Antenna
display. You can then use the Antenna Location pop-up and the
Signal Strength Meter to help aim your Satellite Dish Antenna.
Entering Your Antenna Location
The Antenna Location pop-up helps you or your professional installer
aim your Satellite Dish Antenna based on your zip code or your latitude
and longitude location.
1 Highlight and select “Antenna Location” from the
Antenna display.
The Antenna Location pop-up appears.
2 Select “Zip Code”.
The Zip Code pop-up appears.
3 Enter your Zip Code, then select “OK”.
If you have a Round Satellite Dish Antenna, you or your
professional installer can use the azimuth and elevation readings
to aim the antenna. If you have an Oval 2-Sat or Oval 3-Sat Satellite
Dish Antenna, you or your professional installer can use the
azimuth, elevation and tilt readings to aim the antenna.
z Tip
If it is more convenient for you to
enter latitude and longitude, select
“Latitude & Longitude” instead of
“Zip Code”.
Note
Round Satellite Dish Antennas do
not have a Tilt setting.
Move the
joystick to
change the
number
Move the joystick
to move to the
next digit
OK
Closes the pop-up and
saves your changes.
Cancel
Closes the pop-up
without saving the
changes. m
M
< ,