Sony HD100 - Manual (Page 23)

23
Vi
e
win
g Pi
c
tu
re
s
Fr
o
m
Y
our
Digi
ta
l
S
a
tel
lit
e Recei
ver
z Tip
The FUNCTION button indicators light
up to show you which equipment the
remote control is operating.
Note
You may need to set up the remote
control to operate your other audio/
video equipment. See “Setting Up the
Remote Control” on page 19 for details.
1 Press the POWER SAT button to turn on the
Digital Satellite Receiver.
The POWER indicator lights up.
2 Press the TV button to turn on the TV.
3 Press the TV FUNCTION button, then select the
TV’s input source to which you connected the
Digital Satellite Receiver.
Depending on how you connected your Digital Satellite Receiver
to your TV, the input source could be channel 3 or channel 4, or
you may need to use the TV/VIDEO button to select one of the
A/V input sources.
To make sure you are viewing satellite pictures
Press the SAT FUNCTION button, then press the MENU button
to open the Main Menu.
If the Main Menu does not appear, turn off your equipment,
check your connections and repeat from step 1.
Press the EXIT button to close the Main Menu.
POWER
SAT
TV
3 4
/ /
TV/VIDEO
MENU
Turning On the Power