Sony HD100 - Manual (Page 27)

27
Usi
n
g
t
h
e
O
n
-Screen
Di
sp
lays
Setting Up the Satellite or Digital TV
Antenna
This display helps you or your professional installer aim your Satellite
Dish Antenna or your digital TV antenna to get the strongest signal.
For complete information on installation of your Satellite Dish Antenna,
see the Satellite Dish Antenna Installation Instructions.
1 Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
2 Highlight and select “Antenna”.
The Antenna display appears.
MENU
Antenna Type
Select Round, Oval 2-Sat, Oval 3-Sat,
or Digital TV depending on your
Antenna type.
Transponder
Selects a transponder for the satellite
signal strength meter.
Antenna Location
Lets you find out the direction of the
satellite from your location.
Return
Closes the Antenna display to
show the Main Menu.
Help
Opens information about the
Antenna display.
Signal Strength Meter
Shows the current and peak
levels of the signal strength.
Azimuth, Elevation and Tilt
Shows how to aim your Satellite Dish
Antenna depending on your antenna
type and location.
Status
“Locked” shows that your Satellite
Dish Antenna is receiving a signal.
“Unlocked” shows that a signal is not
being received.
Signal Seeker™
When using a Round antenna,
shows that your Satellite Dish
Antenna’s Signal Seeker can be
used.
Note
Most areas of the United States will
not receive a peak satellite signal
strength of 100. Although there is no
picture quality difference between a
signal strength of 70 and 100 for
satellite signals and 80 and 100 for
digital TV signals, a higher signal
strength will limit any negative effects
in degraded conditions such as rain or
snow.