Sony HD100 - Manual (Page 35)

35
Usi
n
g
t
h
e
O
n
-Screen
Di
sp
lays
Selecting RF or IR Remote Control
Reception
The RF feature allows you to operate the Digital Satellite Receiver from
outside a cabinet or from another room within your home. The RF
Antenna must be connected to use the RF feature (see page 14).
1 Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
2 Highlight and select “Remote Control”.
The Remote Control display appears.
MENU
Remote Signal
Lets you select IR (infrared) or RF
(radio frequency) as the type of
signal the receiver accepts.
RF Security Control
Lets you change the security code.
RF signals are used to control
many devices. You may need to
change the security code so that
this remote control operates the
Digital Satellite Receiver only.
Return
Closes the Remote Control
display to show the Main Menu.
Help
Opens information about the
Remote Control display.
3 Highlight and select “Remote Signal”.
The Remote Signal pop-up appears.