Sony HD100 - Manual (Page 8)

8
The SATELLITE IN jack sends power to, and receives satellite signals
from, the Satellite Dish Antenna. The VHF/UHF IN and VHF/UHF IN
(DTV) jacks receive signals from your TV antenna(s) or cable company
service.
VHF/UHF IN
VHF(SAT)/UHF
OUT VGA OUT
ACCESS CARD
V
1
(MON
L
R
S VIDEO
AUDIO
AUDIO/VIDE
RF
REMOTE
SATELLITE IN VHF/UHF IN (DTV)
VCR
CONTROL
LOW SPEED
DATA
DIGITAL
AUDIO
OUT
(OPTICAL)
2
Digital Satellite Receiver
If you have a Satellite Dish
Antenna
Connect it to the SATELLITE IN
jack on your Digital Satellite
Receiver using RG-6 coaxial cable
(not supplied).
Note
Your Satellite Dish Antenna
Installation Instructions provides
detailed instructions on how to
install RG-6 coaxial cable from
your Satellite Dish Antenna.
z Tip
For best reception performance,
use the Sony SAN-18D3 or
SAN-24MD1 Satellite Dish
Antenna.
CAUTION
Only connect your authorized
Satellite Dish Antenna to the
SATELLITE IN jack as described
in the Installation Instructions.
Connecting any other equipment
to this jack could result in damage
to the equipment and/or receiver.
If you have a local TV
antenna or cable company
service
Connect it to the VHF/UHF IN
jack on your Digital Satellite
Receiver using a coaxial cable or
RF adapter (not supplied).
1 If you have a Digital TV
antenna
Connect it to the VHF/UHF IN
(DTV) jack on your Digital
Satellite Receiver using a coaxial
cable or RF adapter (not
supplied).
RG-6 Coaxial Cable from
Satellite Dish Antenna
1 2
Step 1: Connecting the Antennas or Cable TV