Sony HD100 - Manual (Page 84)

84
Front Panel
1 POWER Button
Turns your Digital Satellite Receiver on and off.
2 Display Window
Displays information about your Digital Satellite
Receiver.
3 Arrow and Buttons
The arrow buttons move the highlight in the
on-screen displays. The
button selects the
highlighted item.
4 MENU Button
Opens the Main Menu.
5 GUIDE Button
Opens the Program Guide.
6 OUTPUT SELECT button
Changes the video output of your Digital Satellite
Receiver. The available settings are:
• Video 1/2, VHF/UHF 480i
• Video 3 480i
• Video 3 variable
• Video 3 1080i
• VGA 1080i
Display Window
1 Power indicator
Shows that the Digital Satellite Receiver is on.
2 TV/SAT indicator
The TV indicator shows that signals from the
VHF/UHF IN jack are being output from the
VHF(SAT)/UHF OUT jack. The SAT indicator
shows that signals from all three inputs are being
output from the VHF(SAT)/UHF jack. Use the
TV/SAT button on the remote control to change
the output.
3 TIMER indicator
Shows that a Timer event is scheduled.
4 TIMER REC indicator
Shows that a Timer& Rec event is scheduled.
5 Dolby Digital Indicator
Shows that Dolby Digital audio signals are
available.
6 Clock Display
Shows time information. The time is
automatically set by your service provider if you
receive satellite signals.
7 Channel Number/Station Name Display
Shows channel number and station name
information. Shows the OUTPUT SELECT status.
Shows the antenna signal strength level. Shows
the status of Timer and Timer & Rec events. It
may also display song, artist, and other
information from certain satellite music channels.
POWER
OUTPUT SELECT GUIDE MENU
2 1
5 4
3
6
DIGITAL TV/SATELLITE RECEIVER SAT-HD100
1 2 3 4 7 5 6
Other Information
Location and Function of Controls