Sanyo DP23845 - Manual (Page 9)

9 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Switch off TV and external equipment before
connecting cables.
(Cables are not supplied.)
1 Connect a DVD Player or other equipment’s
Component Video Out to the TV Compo-
nent Video In (Y-Pb-Pr) Jacks.
2 Connect the DVD Player’s Audio Out to the
TV Component L / R Jacks.
3 Press POWER to turn on the TV. Turn on
external equipment also.
4 Press the INPUT key to select COMPO-
NENT2.
DVD Player
(or other Digital
Device, such as, a
Digital Satellite
Receiver, Digital
Cable Box, or Video
Game)
USING THE COMPONENT AUDIO VIDEO INPUT JACKS
LCD TV Back
1
■ A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal is
being detected at the Component jacks. Check connec-
tion, and turn on external equipment.
■ Press the INPUT key after connecting cables to access
the AV Inputs. There is NO need to tune to a blank
channel.
What you will need for connections:
• Component Video Cable – 1
• Audio Cable – 1
Remote Control
3
4
CONNECTING A DVD PLAYER OR OTHER EQUIPMENT
1
2
Note: Audio/Video Input (AV2) and Component
Video Inputs (AV2) share the same Audio
(L / R) Input jacks.
Audio L/R
Jacks
Component
(Y-Pb-Pr) Jacks
2