Sony MHC-RG60 - Manual (Page 7)

7
Getting Started
3 Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
FM
75
AM
Jack type B
AM
FM
75
CO
AXIA
L
AM loop antenna
Extend the FM lead antenna
horizontally
AM loop antenna
Extend the FM lead antenna
horizontally
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the surround speakers on top of a TV.
This may cause distortion of the colors in the TV
screen.
• Be sure to connect both left and right surround
speakers. Otherwise, the sound will not be heard.
Positioning the speakers (MHC-RG60
only)
1
Place the front speakers at an angle of
45 degrees from your listening
position.
4 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
120V 220V 230 - 240V
5 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
To connect optional components
See page 22.
45º
2
Place the surround speakers facing
each other at about 60 to 90 cm above
your listening position.
continued
Front
speaker
(L) Front
speaker
(R)
Surround
speaker
(L) Surround
speaker
(R)
Surround
speaker
60 to 90 cm