Sony HTD-710SS - Manual (Page 27)

Ad
v
a
nc
ed Adjustme
nts an
d Setti
ng
s
masterpage:Right
lename[D:\Sony SEM
5\Revision_HTR210SS\J9050956_2599618112HTR210SS_GB\2599618112\GB06ADV_HTR-
10SS-CEL.fm]
27 GB
model name1[HTR-210SS]
[2-599-618-11(2)]
x EFCT. XXX (Effect level)
Initial setting: STD
Lets you adjust the “presence” of the surround effect in
3 levels – MIN (minimum effect), STD (standard
effect) and MAX (maximum effect).
Note
This parameter is valid only when you use a sound
field selected with the MOVIE or MUSIC buttons.
Resetting sound fields to the
initial settings
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the power.
2
While holding down SOUND FIELD,
press
?/1 .
“SF. CLR.” appears in the display and all
sound fields are reset to the initial setting.
You can adjust the tonal quality (bass, treble
level) of the front speakers using the TONE
menu.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2
Press MAIN MENU repeatedly to select
“
TONE ”.
3
Press or repeatedly to select the
parameter you want to adjust.
For details, see “TONE menu parameters”
below.
4
While monitoring the sound, press
or repeatedly to select the setting
you want.
The setting is entered automatically.
5
Repeat steps 3 and 4 to adjust the other
items.
Notes
• You cannot adjust the tone when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz.
• You also cannot adjust the tone when you select a
sound field for movies and music (page 24, 25).
TONE menu parameters
x BASS XX dB
(Front speaker bass level)
x TREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –6 dB to +6 dB in 1 dB steps.
Adjusting the tone
GB01COV_HTR-210SS-CEL.book Page 27 Wednesday, May 18, 2005 10:15 AM