Sony CD145 - Manual (Page 32)

Answering machine 30
will be played back in the
sequence they are recorded. A
tone will be emitted after each
message. Old messages can be
played back only when all new
messages are heard.The LED
will blink faster when the
message memory is full.
Buttons on the Description
base station
Press to play the message or stop the message
playback
Press to skip the current message and play the
next message
Press to go back to previous message if it is
pressed within one second of current message
playback
Press to replay current message if it is pressed
after one second of current message playback
Increase (+) or decrease (-) speaker volume
during message playback
Press to delete the current message playback
Press and hold for two seconds to delete all old
messages in idle mode
Note
When there is an incoming call
during message playback, the
playback will stop immediately.
You can press
to pick up
the call.
6.8 How to play
incoming messages
The LED on the base station
will blink when there are new
messages. It will stop blinking
after all the new messages are
heard. New incoming messages