Sun Microsystems Sun Fire V40z - Manual (Page 28)

22 Sun Fire V20z and Sun Fire V40z Servers Linux Operating System Installation Guide • May, 2004
6. Insert UnitedLinux 1.0 CD 2 into your server and copy its contents to your PXE
server, by typing the following commands:
# mount /media/cdrom
# cp -a /media/cdrom/* \
/home/pxeboot/SunFire_sles8/unitedlinux-x86_64/CD2
7. Remove UnitedLinux 1.0 CD 2 from the server after you type the following
command:
# umount /dev/cdrom
8. Insert UnitedLinux 1.0 CD 3 into your server and copy its contents to your PXE
server, by typing the following commands:
# mount /media/cdrom
# cp -a /media/cdrom/* \
/home/pxeboot/SunFire_sles8/unitedlinux-x86_64/CD3
9. Remove UnitedLinux 1.0 CD 3 from the server after you type the following
command:
# umount /dev/cdrom
10. Insert UnitedLinux Service Pack 3 CD 1 into your server and copy its contents to
your PXE server by typing the following commands:
# mount /media/cdrom
# cp -a /media/cdrom/* \
/home/pxeboot/SunFire_sles8/sp3-x86_64/CD1
11. Remove UnitedLinux Service Pack 3 CD 1 from the server after you type the
following command:
# umount /dev/cdrom
12. Insert UnitedLinux Service Pack 3 CD 2 into your server and copy its contents to
your PXE server by typing the following commands:
# mount /media/cdrom
# cp -a /media/cdrom/* \
/home/pxeboot/SunFire_sles8/sp3-x86_64/CD2
13. Remove UnitedLinux Service Pack 3 CD 2 from the server after you type the
following command:
# umount /dev/cdrom
14. Set up the boot environment for the client system to boot from by typing the
following commands:
# cd /home/pxeboot/SunFire_sles8/
# ln -s sles8-x86_64/CD1/boot .