Siemens IP-Module CFVA-IP - Manual (Page 17)

Device homepage
9 Device homepage
9.1 Calling up the device homepage
There are two ways of calling up the device homepage:
Using Internet Explorer
Using the Web-Cam IP Manager
9.1.1 Calling up the device homepage using Microsoft Internet Explorer
1. Type the IP address that is allocated to the device in the http address line in
Internet Explorer. See section 10.1: Changing the device IP address.
e. g.:
http://141.73.31.3/
2. Press the Enter key.
The device homepage will be displayed.
9.1.2 Calling up the device homepage using the Web-Cam IP Manager
This assumes that:
The Web-Cam IP Manager and all the devices are located in the same network
segment. If a device and the Web-Cam IP Manager are not located in the same
network segment, you must ensure that associated gateway (router) passes the
SSDP multicast messages sent by the Web-Cam IP Manager to the network
segment where the device is located.
1. Start the Web-Cam IP Manager by loading IP Manager.exe. This application
can be found on the CD.
The Web-Cam IP Manager program window will open:
17
Siemens Building Technologies
Fire Safety & Security Products