Siemens IP-Module CFVA-IP - Manual (Page 23)

Configuring network settings
Each device's IP address or MAC address is unique.
3. Select the device whose IP address you want to change.
4. Click on the Set IP Address button.
The following dialogue window opens:
5. Either manually enter the desired IP address, subnet mask and gateway (if
required), or activate the check box if you want the DHCP server to determine
these parameters.
The settings will be adopted immediately.
This process takes about 40 seconds. Next, the device homepage will be
displayed, allowing you to check the entries in Network settings in the
Configuration menu.
23
Siemens Building Technologies
Fire Safety & Security Products