Siemens Hicom 300 E - Manual (Page 75)

Making multiline and team calls
75 75 75 75
Step by Step
Ending a call on a line key
I
Replace the hand set.
or
Press the key that is lit.
Adding another party to a line (conference)
Precondition: There is a call on one of the lines. The
line key lamp is lit.
Press the line key. Conference tone can be heard by you
and by the users who are already connected. All three
parties can now talk to one another. The lamp remains
lit.
Privacy
Allowing override
Your primary line can be programmed so that no one
can override your call. In this case you can allow over-
ride, but this permission only applies to the call in
progress or to the next call.
You are conducting a call.
or
C
Lift the handset.
With the privacy key configured:
Press the key.
Via the Service Menu:
Press the key. The lamp lights up.
AA
Enter the service code.
S peaker
Line
Adding parties is not possible if the Privacy func-
tion has been activated for the line in question.
If one of the three parties replaces the handset,
the other two remain connected to each other.
If the remaining par ties are yourself (having en-
tered the call) and the person who originally
seized the line, consultation is no longer possible.
Pr ivacy
Ser vice Menu