Sennheiser SKM 5200 User Manual

Page 23

Advertising
background image

25

Entering a name –

NAME

Via the “

NAME

” menu, you can enter a freely selectable name for

the radio microphone. This name can be displayed on the standard
display and can consist of up to six characters such as:

y

letters (without pronounciation marks),

y

numbers from 0 to 9,

y

special characters and spaces.

After you have changed to the setting mode of the “

NAME

” menu,

the first segment starts flashing on the display.

Adjusting the microphone sensitivity –

ATTEN

Via the “

ATTEN

” menu, you can adjust the radio microphone’s

sensitivity by changing its input attenuation.

̈

Slide the multi-function switch

to the position

̆

(UP) or

̄

(DOWN)

to select a character.
(By sliding the switch only once, the
display jumps either forwards or
backwards to the next character. If
you keep the switch slid, the display
starts cycling continuously.)

̈

Press the multi-function switch

(switch position

ț

SET

) to change to

the next segment.

̈

Have you entered the name
completely? Press the multi-
function switch

(switch position

ț

SET

) to store your setting.

“STORED” appears on the display
panel.

The input attenuation is correctly
adjusted when the level display for audio
signal “AF”

ቩ

shows full deflection only

during the loudest passages. The input
attenuation can be adjusted in 1-dB steps
from –40 dB to 0 dB.

SET

DOWN

UP

dB

AF

RF

ቩ

SKM 5200_512717_0506_Sp6.book Seite 25 Donnerstag, 7. Dezember 2006 3:28 15

Advertising