Simplicity 1693848 - Manual (Page 15)

Page 11
DEPTH REGULA DEPTH REGULA DEPTH REGULA DEPTH REGULA DEPTH REGULAT T T T TOR LEVER OR LEVER OR LEVER OR LEVER OR LEVER
Tilling depth is controlled by the height of the depth
regualtor lever.
To adjust tilling depth.
1. Remove detent pin.
2. Raise the depth regulator lever to position tines at
chosen tilling depth.
3. Align hole in depth regulator lever with hole in depth
regulator bracket and replace detent pin.
Adjustments
CAUTION
Always set the depth regulator lever in the transport
position before starting engine, that is, place the detent
pin in the highest hole of the depth regulator lever.
CAUTION
Do not adjust tilling depth unless drive safety control
levers are released to neutral position.
depth regulator
bracket
depth regulator lever
detent pin
Depth Regulator Le Depth Regulator Le Depth Regulator Le Depth Regulator Le Depth Regulator Lev vv v ver Do er Do er Do er Do er Down = wn = wn = wn = wn = Shallower tilling. Place
the detent pin in the top hole of the depth regulator lever
for shallowest tilling.
Depth Regulator Le Depth Regulator Le Depth Regulator Le Depth Regulator Le Depth Regulator Lev vv v ver Up = er Up = er Up = er Up = er Up = Deeper tilling. Place the
detent pin in the bottom hole of the depth regulator lever
for deepest tilling.