Simplicity 1693848 - Manual (Page 22)

Page 18
Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.
Engine is shipped from f Engine is shipped from f Engine is shipped from f Engine is shipped from f Engine is shipped from factor actor actor actor actory without oil. y without oil. y without oil. y without oil. y without oil. Y Y Y Y You ou ou ou ou
m m m m must add engine oil bef ust add engine oil bef ust add engine oil bef ust add engine oil bef ust add engine oil before star ore star ore star ore star ore starting engine ting engine ting engine ting engine ting engine.....
Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99.
* Air cooled engines run hotter than automotive engines. Use
of non-synthetic multi-viscosity oils (5W30, 10W-30, etc.)
above 40
ο
F (4
ο
C) will result in high oil consumption and
possible engine damage. Check oil level more frequently if
using these types of oils.
**
SAE 30 oil, if used below 40
ο F (4 ο C), will result in hard
starting and possible engine bore damage due to inadequate
lubrication.
Maintenance and Storage
CHECK OR FILL ENGINE CHECK OR FILL ENGINE CHECK OR FILL ENGINE CHECK OR FILL ENGINE CHECK OR FILL ENGINE
CRANKCASE
CRANKCASE CRANKCASE CRANKCASE CRANKCASE
1. Add oil according to chart below. Do not o Do not o Do not o Do not o Do not ov v v v verfill. erfill. erfill. erfill. erfill.
Use a high quality detergent oil classified "For
Service SF-SJ,". Use no special additives with
recommended oils. Do not mix oil with gasoline.
2. Always check oil level before starting engine. Refer
to engine manual for complete instructions.