Samsung Delve SCH-R800 - Manual (Page 27)

Call Functions 24
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press the Voice Recognition key ( ).
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays and prompts you with “Call?” followed
by a choice list of up to three numbers.
4. Do one of the following:
• Press one of the number buttons.
• Say “Yes” to confirm the first number.
• Say “No” to hear the next number.
• Say “Repeat” to hear the numbers again.
• Say “Cancel” to exit Voice Service without dialing.
(For more information, refer to “Confirmation” on
page 110.)
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (hard waits) P Pauses(s), wait
for the appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
• If you voice dial a contact that contains (two-second) T Pause(s) simply
wait for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including: Silent all, Alarm only,
Vibrate
only , 1 Beep, Low, Low/Medium, Medium, Medium/High, or
High, and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.