Sun Microsystems 5.1.1 - Manual (Page 50)

Chapter 5 Section 5.5
Configuring the HTTPS eWay eWay Environment Properties
HTTPS eWay Adapter User’s Guide 50 Sun Microsystems, Inc.
Authentication
Details for the Authentication settings used for HTTP authentication are detailed in
Table 7.
SSL
Details for the SSL settings used for SSL connections are detailed in Table 8.
Table 7 Environment Configuration—Security, Authentication
Name Description Required Value
HTTP Username Specifies the user name for
authenticating the web site specified by
the URL. A valid user name.
Important: Enter a
value for this property
before you enter a
value for the HTTP
password properties.
HTTP Password Specifies the password used for
authenticating the web site specified by
the URL. A valid password.
Important: Be sure to
enter a value for the
HTTP username
properties before
entering this property.
Table 8 Environment Configuration—Security, SSL
Name Description Required Value
Protocol SSL The SSL protocol to use when
establishing an SSL connection with the
server. If the protocol is not set by this
method, the default protocol type, TLS
(Sun JSSE), is used. If an SSL connection is
not required, leave the default No SSL
option. If you are using the default
Sun JSSE provider, choose
one of the following settings:
ΠTLSv1
ΠTLS
ΠSSLv2
ΠSSLv3
ΠSSL
If you are running the Sun
SeeBeyond Integration Server
on AIX, choose or enter one
of the following settings:
ΠSSL-TLS
ΠTLSv1
ΠTLS
ΠSSLv3
ΠSSLv2
ΠSSL
For details on these settings,
see the appropriate JSSE
documentation.