Sony XC-HR300 - Manual (Page 10)

10
Mode Setting
Image Output Mode
The unit has two image signal output modes. Select the
mode by setting the read mode switch on the rear
panel.
2I Mode (Factory Default)
The VIDEO OUT 1 and VIDEO OUT 2 connectors
output ODD/EVEN interlaced images every 1/100
second. The SYNC signals are the same for the
VIDEO OUT 1 and VIDEO OUT 2 connectors.
– External synchronization: EXT-HD/VD is allowed.
1N Mode
Only the VIDEO OUT 1 connector outputs non-
interlaced 1/50 second images. The VIDEO OUT 2
connector does not output any images.
– External synchronization: EXT-HD/VD is allowed.
ODD image
VIDEO OUT 1
VIDEO OUT 2
FLD-1
EVEN image
FLD-2
ODD image
FLD-1
EVEN image
FLD-2
ODD image
FLD-1
EVEN image
FLD-1
ODD image
FLD-2
EVEN image
FLD-1
ODD image
FLD-2
EVEN image
FLD-1
1/100 second
Same SYNC
1/50 second
Same SYNC
Frame image Frame image Frame image
VIDEO OUT 1
VIDEO OUT 2