Sony XC-HR300 - Manual (Page 8)

8
Mode Setting
Specifications of the Input/Output
Input Phase Specifications of the External HD/VD
100
100 100
472 472
0
Unit: Clock
1Clk=33.898 nsec
Make sure that the external HD/VD phases against the
standard central phase are as shown in the figure
above. Invalid signal input may cause an error in the
internal reset.
When you restart/reset the camera or operate the
camera by inputting an external trigger shutter pulse,
the Vsync signal for the image is output 1 H later from
the external VD.
External VD
External HD
EVEN,
Non Interlace
ODD
Mode Setting
Normal:
1N: Consecutively operated with 32
µ
s HD frequency
and 20 ms VD frequency. (See the above figure for
the phase timing).
2I: Consecutively operated with 32
µ
s HD frequency
and 10 ms VD frequency. (See the above figure
for the phase timing).
Restart/Restart and /External trigger shutter
Consecutively operated with 32
µ
s HD frequency. VD
(Reset) is on any timing as long as the HD phase
is within the range described above.