Sharp TL-M5200 - Manual (Page 45)

43
Operation
Caution
• Do not switch off the power after setting the
Schedule.
• Specify the correct day and time using “Clock”
before setting “Schedule”. “Schedule” does not
function unless the day and time are specifi ed.
• Set time On and Off values that are within 12 hours of
each other.
• Up to 8 Schedule items can be registered.
• When “Schedule” is set, the TIMER indicator lights red.
• A Schedule that has a large number has precedence
over that of a small number when schedules overlap.
• For resetting all adjustment items to factory preset values,
while selecting the Schedule number, press ▲/▼ to
select “Reset”, and press ENTER.
Note
Sleep Timer
Sets the time to switch the monitor off. (1-12 hours)
1 Press ▲/▼ to select “Sleep Timer”, and press
ENTER.
2 Press ▲/▼ to change the setting.
3 Press ENTER.
“Sleep Timer” setting becomes effective.
• When “Sleep Timer” is set, the TIMER indicator lights red.
Note
„ Picture Flip
A picture flips to appear.
ABC
Normal Mirror
Upside Down Rotate
ABC
ABC ABC
„ Multi Screen
You can align 2, 3, 4, 9, or 16 monitors and integrate
them into a single large screen to display.
Enlarged views of separated images are displayed
in each monitor.
Selectable
items
Description
Status Sets the number of screen splits used
for the enlargement.
Position Specify the split screen to be
displayed when this function is used.
H-Bezel
V-Bezel Sets the frame width of the display
when this function is used.
H-Position Adjust the horizontal position of the
enlarged screen.
V-Position Adjust the vertical position of the
enlarged screen.
Reset Resets all adjustment items to factory
preset values.
Original
image
2 monitors (2x1)
1−1 2−1
3 monitors (3x1)
1−1 2−1 3−1
4 monitors (4x1)
1−1 2−1 3−1 4−1
4 monitors (2x2)
1−1 2−1
1−2 2−2
9 monitors (3x3)
1−1 2−1 3−1
1−2 2−2 3−2
1−3 2−3 3−3
16 monitors (4x4)
1−1 2−1 3−1 4−1
1−2 2−2 3−2 4−2
1−3 2−3 3−3 4−3
1−4 2−4 3−4 4−4
Menu operations