Sharp TL-M5200 - Manual (Page 51)

49
Appendix
„ Computer compatibility chart
The table below shows the signal modes compatible with this device. If the display is incorrect or it does not
display, please refer to the table below and adjust the output signal according to your hardware.
Computer
• Multiple signal support
Horizontal Frequency: 31-80 kHz Pixel Clock: 25-149 MHz
Vertical Frequency: 50-85 Hz Sync signal: Compatible with TTL level
• Compatible with sync on green signal
The following is a list of modes that conform to VESA. However, this monitor supports other signals that are
not VESA standards.
PC/MAC Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
VESA
Standard
DVI-D
Support
Display
PC
VGA
640x400 31.5 70 ✔
Upscale
720x400
31.5 70 ✔
37.9 85 ✔
640x480
31.5 60 ✔ ✔
37.9 72 ✔ ✔
37.5 75 ✔ ✔
43.3 85 ✔
SVGA 800x600
31.3 50
35.2 56 ✔ ✔
37.9 60 ✔ ✔
48.1 72 ✔ ✔
46.9 75 ✔ ✔
XGA 1024x768
48.4 60 ✔ ✔
56.5 70 ✔
58.1 72 ✔
60.0 75 ✔ ✔
WXGA
1280x720 44.7 60 ✔
1280x768 47.8 60 ✔ ✔
1360x768 47.7 60 ✔
SXGA 1280x1024
64.0 60 ✔ ✔
80.0 75 ✔
SXGA+ 1400x1050
64.0 60 ✔
65.3 60 ✔ ✔
1920x1080* 67.0 60 ✔ True
MAC
13” 640x480 35.0 67
Upscale 16” 832x624 49.7 75
21” 1152x870 68.7 75
* DVI only
DTV
Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) DVI-D/HDMI Support (Compatible with HDCP)
480I 15.7 60
480P 31.5 60 ✔
576I 15.6 50
576P 31.3 50 ✔
720P 37.5 50 ✔
720P 45.0 60 ✔
1035I 33.8 60 ✔
1080I 28.1 50 ✔
1080I 33.8 60 ✔
1080P 56.3 50 ✔
1080P 67.5 60 ✔
• All are compliant only with non-interlaced.
• Depending on the connected computer, images may not be displayed properly even if the compatible
signal described above is input.
Specifi cations