Samsung ML-1200 - Manual (Page 56)

A PPENDIX A.11 A PPENDIX A.10
Using Your Printer with a USB Cable
To operate your printer with a Windows PC, you must install the
PrinThru printer driver. Place the CD-ROM in the CD-ROM drive
and perform the instructions on page
2.8 .
1 Insure both the printer and computer are turned ON.
2 Plug one end of the USB cable into the USB port on the
printer.
2. Connect printer with
USB cable and
install USB driver
1. Install PrinThru driver
Installing the Printer Software
To the USB port
on PC
➜
Using Your Printer with a USB Cable
3 Plug the other end into the USB port on the computer.
4 The Add New Hardware Wizard dialog box appears. Click
Next.
5 Check Search for the best driver for your device and click
Next.
If you have a USB (Universal Serial Bus) port enabled on your
computer, and if your computer is running Windows 98, you can
connect your printer to the USB chain of devices.
Note: To connect the printer to the USB port of the
computer requires a certified USB cable.
You will need to buy the USB 1.0 compliant cable.
And the length should be less than three meters.