Siemens C2 - Manual (Page 19)

19
Handset settings
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / tel_direct_hands_sett.fm / 28.03.2003
Setting the Walk and Talk mode
The Walk and Talk function allows two C 2 handsets (maximum range 300 metres) to
call each other no matter how far they are from the base.
Precondition:
◆ Both handsets have been registered to the same base or
◆ Both handsets are registered to different bases and both are set to Best Base
(page 8) or
◆ One of the handsets is not registered to any base and the registered handset is set
to Best Base or
◆ Neither handset is registered to a base.
Activating/deactivating the Walk and Talk mode
MENU ; s
Additional Features OK; s
Walk and Talk OK .
To deactivate: MENU; s
Walk and Talk Off OK .
Ring and advisory tones are set in exactly the same way as if your handsets at home
were in range of the base (page 20 and page 21).
'Activate/deactivate ringer' (page 20) and 'Activate/deactivate keypad lock' (page 9) are
available in the Walk and Talk mode.
Handset settings
Your handset is preset. You can change the settings to suit your requirements.
Activating/deactivating Auto Answer
With this function you simply lift the handset out of its charging shell when a call arrives
- there is no need to press
c
(the default is On).
MENU ;
s
Handset Settings OK; Auto Answer OK (
‰
= On);
press
a
and hold (return to idle status).
i
In Walk and Talk mode
◆ The handsets cannot be reached by incoming calls,
◆ Handset operating times are severely curtailed.
i
The Walk and Talk mode is retained even when you switch your handset
off and back on.