Sony PCNA-MR10 - Manual (Page 5)

5
❑ In a location that is subject to moisture or rapid temperature change.
❑ Near obstacles that shield or block electrical signals, such as metal or concrete walls.
❑ In a location with poor ventilation.
❑ If there is a rapid change in temperature, condensation (water droplets) may form in
RoomLink™, causing it to malfunction.
❑ If this occurs, disconnect the equipment from the VAIO® computer and TV for two to
three hours. The unit should resume normal operation.
❑ To clean the RoomLink™ device:
❑ Wipe it with a soft, dry cloth.
❑ If the unit requires more cleaning, use a soft cloth that is slightly moistened with a mild
detergent solution. Avoid getting the terminals wet.
❑ Do not use cleaners that contain thinner, benzene, or alcohol, as these compounds may
damage the surface of the equipment.
❑ Avoid connecting these phone lines to the Network connector on the unit:
❑ Private Branch Exchange (PBX) lines
❑ Network cable that do not meet the 100Base-TX standards
❑ Home or business phone lines
About the AC adapter
❑ Use the AC adapter that is supplied with RoomLink™. Using different AC adapter may cause
damage to the network media receiver.
❑ Unplug the AC adapter from the AC wall outlet, when the equipment is not being used for
extended periods of time.
About the Remote Commander
❑ Use only AA-size alkaline batteries in the Remote Commander® unit.
❑ Remove the batteries from the Remote Commander when it is not in use for extended periods.