Sprint Nextel M520 - Manual (Page 41)

Phone Basics
Section 2A. Phone Basics 25
ⅷ (4) Find: displays Contacts entries that contain the
entered numbers. (See “Finding a Phone Number”
on page 30.)
ⅷ (5) Hard Pause: allows you to enter a hard pause (the
phone waits for user input). (See “Dialing and Saving
Phone Numbers With Pauses” on page 30.)
ⅷ (6) 2sec Pause: allows you to enter a two-second
pause. (See “Dialing and Saving Phone Numbers
With Pauses” on page 30.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go directly to voicemail.)
2. Press or slide the phone open to answer an
incoming call. (Depending on your phone’s
settings, you may also answer incoming calls by
opening the phone or by pressing any number
key. See “Call Answer Mode” on page 51 for more
information.)
Your phone notifies you of incoming calls in the
following ways:
ⅷ The phone rings, vibrates, or both.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
ⅷ The Status Light blinks. (See “Activating the Status
Light” on page 41.)
If the incoming call is from a number stored in your
Contacts, the entry’s name is displayed. The caller’s
phone number may also be displayed, if available.
If Call Answer is set to Talk Only , the following options
are also displayed. To select an option, press the
corresponding softkey. (See “Call Answer Mode” on
page 51.)
ⅷ Answer to answer the call.
ⅷ Ignore to send the call to your voicemail box.
Tip To quiet the ringer, press the Back , End , or volume
key.
M520_Sprint.book Page 25 Thursday, September 18, 2008 12:34 PM