Sprint Nextel M520 - Manual (Page 70)

54 Section 2B. Settings
To enable voice caller ID:
1. While in standby mode, select Main Menu > Settings
> More... > Call Setup > Voice Caller ID .
2. Select On .
To disable voice caller ID:
1. While in standby mode, select Main Menu > Settings
> More... > Call Setup > Voice Caller ID .
2. Select Off .
Note If a caller's ID is blocked, "Call From Private Number"
will be announced through your headset. If no
information can be determined, such as an out-of-
area call, "Call From Unknown number" will be
announced through your headset.
M520_Sprint.book Page 54 Thursday, September 18, 2008 12:34 PM