Samsung C21RJAN - Manual (Page 8)


EN
Installing the Hob (Continued)
Connecting to the outlet
Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated
on the rating plate, corresponds to the available supply voltage The rating plate is located on
the lower casing of the hob
The heating element voltage is AC240 V~ This appliance is equipped with a cord that includes
a grounding wire and a grounding plug The plug must be plugged into an outlet that is
properly installed and grounded
Once the hob is connected to the mains supply, check that all cooking zones are
ready for use by briefly switching each on in turn at the maximum setting.
When the hob is powered on for the first time, all displays light and the child safety
lock is activated
Installing into the countertop
Make a note of the serial number on the appliance rating plate prior to installation
This number will be required in the case of requests for service and is no longer
accessible after installation, as it is on the original rating plate on the underside of the
appliance
Pay special attention to the minimum space and clearance requirements
Secure the brackets at both sides with the provided screws before mounting the hob
onto the brackets
273 min. 20
600
50
+1
R3
490 +1
x4
x4 90
2
100
100
490 +1
=
=
min 50mm
C21RJAN_XSA-00144A_EN.indd 6 2008-10-07 5:01:14