Spalding M7900412 - Manual (Page 12)

12
ID# M7900412 05/06
First, test fit spacer (10) into back bracket (13) and Carefully rock in a circular motion to ream out
any excess paint from holes if necessary. Insert spacer (10) through bottom holes in board bracket
(13) and inner bracket (14).
BOTTOM VIEW
13
10
13
10
Ends of spacer (10) should be
flush on both sides of board
bracket (13).
NOTE:
Spacer
flush with
bracket
Spacer
flush with
bracket
Secure back bracket (13) fully to backboard by inserting bolts (16) through upper holes in back
bracket (13), Add washers (6) and nuts (17) to bolts (16).
Tighten nuts (17) completely.
10.
11.
17
13
22
6
6
16